Composite panel · A2 core
A2 non-combustible composite panel
Aluminum composite panel with a mineral core and a fire rating of A2-s1,d0 (EN 13501-1), the highest rating achievable for a composite panel.
- Mineral Core
- Fire reaction class A2-s1,d0
- Thickness: 4 mm
- Sheet size: 1,500 × 5,000 mm
Mineral core
For facades that require non-combustible materials
This is the core for facades where the project requires a non-combustible material: high-rise residential buildings, hospitals, schools, hotels or buildings open to the public. With a core of around 90% mineral filler, it achieves this level of safety without giving up the lightness, flatness or range of finishes of a PVDF-coated aluminum panel, and it is 100% recyclable, core included. We supply it cut, milled and folded to size, ready to install. We install in Catalonia and ship worldwide.
It is machined like the other cores, with two differences we take into account when preparing the cutting plan: it is folded at 90° or 135° (it does not allow 180° folds), and its flanges should not be folded more than twice. It can also be roll-curved and installed with hanging trays, male-female trays or rivets. The choice between A2 and FR is made by the project designer according to the building regulations; at StarModul we explain the differences and advise you with no obligation.
- Core: Mineral
- Fire reaction: A2-s1,d0
- Thickness: 4 mm
- Sheet size: 1,500 × 5,000 mm
Technical Specifications of the A2 Composite Panel
| Core | Mineral Core (approx. 90% mineral content) |
|---|---|
| Total thickness | 4 mm |
| Aluminum sheets | 0.5 mm + 0.5 mm (5005 alloy on the visible side) |
| Weight | 9.3 kg/m² (±8%) |
| Plate Size | 1,500 × 5,000 mm (other sizes available upon request) |
| Reaction to Fire | A2-s1,d0 according to EN 13501-1 |
| Lacquered | Standard PVDF 70/30 (high UV resistance); also FEVE and high-durability polyester |
| Operating temperature | −50 to +80 °C |
| Thermal expansion | 1.3 mm per meter per 100 °C (panel) |
| Bending stiffness (EI) | 2,400 kN·cm²/m |
| Sound insulation | Rw 29 dB |
| Peel Strength | ≥ 3 N/mm |
| Tolerances | Thickness −0.15/+0.10 mm · width −0/+2 mm · length −0/+10 mm · diagonals ±3 mm |
| Machining | 90° and 135° bends; does not support 180° bends. Tabs: maximum of two bends |
| Colours | More than 100 finishes and any RAL, Pantone, or NCS color available upon request (see colors) |
| Recyclable | 100%, including the core |
| CE Marking | Yes, with European technical assessment |
When should you choose the A2 core?
- When the project or regulations (CTE DB-SI in Spain) require a high fire resistance rating for the facade.
- In tall buildings and public buildings, where fire safety is a top priority.
- If you’re unsure whether to choose A2 or FR, the project engineer will make the decision. We’ll explain the differences between composite panels and offer you advice with no obligation.
Machining of the A2 panel
A2 is cut, milled, and folded into trays just like the other cores, with two differences: it is folded at 90° or 135° (it cannot be folded at 180°), and the flanges must not be folded more than twice. It can also be curved using rollers. We do this in our workshop: see our machining services.
Frequently asked questions
Is the A2 composite panel non-combustible?
Its classification is A2-s1,d0: non-combustible material with very low smoke emission (s1) and no flaming droplets or particles (d0). It is the highest possible class for a composite panel.
What are the dimensions of the plate?
The standard size is 1,500 × 5,000 mm, with a thickness of 4 mm. For other sizes, please contact us. We also cut and machine each piece to fit your project.
How much does it weigh?
About 9.3 kg/m², slightly more than the 4-mm FR (7.3 kg/m²) due to the mineral filler in the core.
What is the difference between this and the FR panel?
The FR panel is rated B-s1,d0 and is lighter and slightly more economical; the A2 panel is rated A2-s1,d0. For facades where non-combustible material is required, use the A2 panel. See the FR panel.
How much does it cost?
It depends on the finish, quantity, and machining. As a general guide, composite panels range from 40 to 60 €/m²; A2 panels are at the higher end of that range. Request a quote.
Do you need A2 composite panels for your facade?
Tell us the dimensions, quantity, and finish, and we’ll give you a price that includes cutting and machining. We assemble in Catalonia and ship worldwide.
Request a quote or call 699 147 762