Composite panel price per square meter
When it comes to budgeting for a facade or interior cladding, the cost of the material is the determining factor. The aluminum composite panel has democratized modern architecture, offering a very competitive price-quality ratio compared to natural stone or large-format ceramics. However, not all panels cost the same.
Variables defining cost
The composite panel m2 price fluctuates depending on the technical specifications required for each project.
-
–
Aluminum thickness: 0.5mm sheets are more expensive than 0.3mm, but necessary for large facades. -
–
Inner core: Standard core (PE) is more economical than fire retardant (FR) or non-combustible (A2) core. -
–
Surface finish: Basic solid colors are less expensive than wood, mirror or textured finishes.
Indicative price ranges
Below is a market estimate to assist in investment planning.
Note: Material prices, excluding base structure and labor.
Budget optimization
In order to get the best price, it is vital to calculate the cutting. If you need advice, consult these siding specialists.
Reducing waste (shrinkage) is key to not paying for material that will end up in the trash.
-
–
Adjust the design to standard plate sizes (generally 1250mm x 2500mm or 1500mm x 3000mm). -
–
Choose simplified fastening systems (riveted) as opposed to hanging tray systems if regulations permit.
Consult the updated composite panel m2 price, as aluminum is listed on the stock exchange.
Conclusion
Composite is a profitable investment because it is maintenance-free. Choosing the right thickness and core for the actual use will avoid unnecessary cost overruns.
Frequently asked questions about composite panel price m2
No. The price per meter usually refers only to the plate. Aluminum profiles, brackets and screws are quoted separately according to the mounting system.
The initial investment is higher, but since it does not require repainting every 5-8 years, it is amortized in the medium term, in addition to the energy savings it provides.
Standard chart colors (white, gray, black, silver) are usually the same price. Corporate or custom colors (specific RAL) are more expensive.
For stock panels there is usually no minimum. For custom colors or special factory sizes, minimum quantities are usually required (e.g. 300-500 m2).
Yes, it is a bulky and heavy material. Transportation may increase the unit price if the order is small.
The exposed fastening system (rivets or lacquered screws) is considerably more economical and faster to install than the cassette or hanging tray system.