Aluminum COMPOSITE PANEL for facades

info@starmodul.com

Contact Email

973 228 164 · 609 601 119

Phone · WhatsApp

View all entries

Renovating an Old Facade with Aluminum Composite Cladding

Updating the appearance of an outdated building immediately increases its market value and revitalizes the urban environment. A ventilated facade system allows you to conceal damage to the original walls without having to tear them down. Working with suppliers of architectural envelope materials makes it easier to design a substructure that adapts to the irregularities of the old building.

This project not only corrects visual issues but also permanently eliminates condensation-related moisture problems inside homes. Installing a composite facade is the least invasive method for giving industrial buildings and apartment complexes a new lease on life.

Technical Advantages of Composite Facade Renovation

Problem with the original building Solution Provided by the New Cladding Direct benefit
Detachment of Cladding Secure mechanical attachment to the load-bearing wall Complete road and pedestrian safety
Dampness and Water Leaks Continuous air chamber that dries the wall A healthy indoor environment free of mold
Poor thermal insulation Insulation installed behind the panels Significant savings on heating and air conditioning

Stages of a Composite Facade Renovation

  • 1.
    Scanning and topographic surveying to identify the drops and curves in the original wall.
  • 2.
    Installation of anchor brackets secured directly to the concrete slabs.
  • 3.
    Installation of insulation material, such as rock wool, affixed to the existing wall.
  • 4.
    Leveling the vertical aluminum profiles to create a perfectly straight grid.
  • 5.
    Hang and secure the prefabricated panels, leaving the specified expansion joints.

The entire process is carried out on the exterior of the building, which means that tenants or employees can maintain their daily routines without experiencing the inconvenience of dust and extreme noise inside their spaces.

Frequently Asked Questions About Composite Facade Restoration

Can the old structure support the weight of the new facade?
Yes, the combined weight of the profiles and the panel is very low—about six kilograms per square meter—which is manageable for almost any building.
Do you need to chip away or remove the old brick before installing?
Usually not, as long as the wall provides a good grip for the chemical or mechanical anchors of the brackets.
Is a lot of usable space lost on sidewalks or balconies?
The entire system adds between ten and fifteen centimeters to the building’s original thickness, which is a minimal intrusion.
Does this system correct walls that are crooked?
Absolutely. The substructure is adjusted with millimeter precision to create a completely straight exterior surface, regardless of the condition of the back wall.
Do I need to ask the city council for permission to make this change?
Yes, altering the building’s exterior appearance and dimensions requires an approved technical plan and a major construction permit.
Does it help reduce street noise?
The combination of the panel, the air chamber, and the new thermal insulation significantly improves the sound insulation of the homes.